Admiral AAW-10CR1FHU Specifications download pdf (Page 9)

installation instructions /

5. Installation of Mounting Brackets and

First Sealing Strip

NOTE: Windows come in a variety of different

styles. Therefore, it may be necessary to modify

or improve your particular installation.

A. Attach the bracket assembly to 90°angle support

brackets (Fig. 5) using (2) 1 1/2" bolts

Two bolts per bracket. Secure with the (2)

1/4" lock washers and (2) 1/4"nuts. DO NOT

immediately tighten these bolts as it may be

necessary to adjust the depth of the bracket

assembly, depending on the depth of your window sill.

See (Fig. 7).Enstall the two leveling screws into the

90° support brackets. Test the bracket assembly in the

window before cabinet installation. Efthe leveling

screws are distanced too far away from the wall to

provide stability, it may be necessary for you to fill

this area with a solid piece of wood. See (Fig. 8).

B. Measure the inside window sill width and find the

center as shown in (Fig. 6). Align the V=slot in each

bracket on these marks and mount the brackets to the

sill using 3/4" screws provided. Brackets should be

perpendicular to the inside window sill. See (Fig. 6).

C. For proper condensation run-off it will be necessary

to adjust the angle/pitch of the window brackets. This is

accomplished by adjusting the distance of the leveling

screw on the outer wall. The maximum angle/pitch

should not exceed more than 3/16". See (Fig. 7).

D. Cut the seal strip to fit the underside of the bottom

window sash. Remove the peel-off backing on the

seal and attach it to this sash. See (Fig. 9).

(TOP VIEW)

10.3"

2.6 _,, _*

Measurement for Model 10K =9.6"

Measurement for Model 12K = 10.3"

Measurement for Model 18K to 24K = 12.6"

Fig. 6

Window sill

_'4 ............. (2) 3/4" screws _er bracket 4.

3/16" Maximum

Bracket Assembly

Leveling Screw

i_,_ ............Outer Wail Construction

Fig. 7

(If required)

Fig. 8

Use a solid piece of wood to provide stability. This

will be required when sills are extra deep.

See (Fig. 8).

=8=

Window Sash

Sealing Strip

Fig. 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 34 35

Comments to this Manuals

No comments

Admiral AAW-10CR1FHU Specifications Page 9

Comments to this Manuals

Related products and manuals for Split-system air conditioners Admiral AAW-10CR1FHU